-
ZIRCAR Ceramics’ Alumina Paper Type APA is a family of thin, uniform, paper-like structures made principally of polycrystalline alumina fiber (PCW). Technical Data Sheet APA-1 Safety Data Sheet APA-2 Safety Data Sheet APA-3 Safety Data Sheet -
ZIRCAR Ceramics’ Alumina Cement Type AL-CEM products are single-part water-based adhesives designed for bonding and or coating high temperature fibrous ceramic and other porous refractory materials. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Reticulated Alumina Type RAHP are rigid, highly-porous bodies of fine-grain dense alumina use as low-mass load supports in numerous industrial applications with temperatures as high as 1750°C (3182°F). Technical Data Sheet Safety Data Sheet -
SALI is a premium-grade high-performance 1700°C insulation fabricated from high-alpha polycrystalline alumina fibers tightly bound in a mullite binder matrix. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina Mat is a lofty, layered, low-density flexible mat made of 100% polycrystalline alumina fiber, designed for use to temperatures as high as 1650°C (3002°F). Technical Data Sheet Safety Data Sheet -
ZAL-45 is a high-density board that exhibits a fine, open-pore structure resulting in a unique combination of high strength and low thermal conductivity. ZAL-45 exhibits very good dimensional stability to 1650°C (3000°F) with intermittent use to 1700°C (3192°F). Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Terminal Clamp Type MTC is used to securely clamp heating element straps onto the terminals of MoSi2 Heating Elements. Technical Data Sheet -
ZIRCAR Ceramics’ Alumina Rigidizer/Hardener Type AL-R/H is single-part water-based suspension of colloidal alumina hydrate particles which is used as a binder, rigidizer or surface hardening agent in applications with temperatures as high as 1700°C (3092°F). Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Type K-1 Heating Element Holders are used to secure and support the terminals of MoSi₂ Heating Elements in applications where the elements are installed from the inside of a furnace chamber. Technical Data Sheet -
AL-25/1700 is a cost-effective medium duty 1700°C rated hot face insulation. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Type H Heating Element Holders gently but securely hold Molybdenum Disilicide Heating Elements in place while providing thermal insulation between the element terminals. Technical Data Sheet -
ZIRCAR Ceramics’ Alumina-Silica Type AX Moldables are putty-like materials consisting of high-purity refractory ceramic fibers (RCF) dispersed in a sticky, water-based refractory binder. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina Bulk Fibers are high-purity polycrystalline alumina fibers (PCW) with useful properties in thermal insulation and advanced material applications with temperatures as high as 1825°C (3317°F). Technical Data Sheet Safety Data Sheet -
ZAL-15 is an engineered low-density structure exhibiting very good hot strength and dimensional stability in industrial applications with continuous operating temperatures to 1550°C (2822°F) - withstanding intermittent use to 1650°C (3002°F). Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina Blankets Type NAB & Type NMB are mechanically-needled blankets made from shot-free, high-purity polycrystalline alumina fiber (PCW) for use in numerous applications with continuous temperatures as high as 1600°C (2912°F). Technical Data Sheet NMB Safety Data Sheet NAB Safety Data Sheet -
ZIRCAR Ceramics’ Heating Element Straps are used to connect MoSi₂Heating Elements together or to a power feed terminal post. Technical Data Sheet -
ZIRCAR Ceramics’ Dense Alumina Hearth Plates, Type DAHP, are used for supporting loads in high-temperature furnaces and other thermal process systems with air atmospheres operating to 1825°C (3317°F). Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ MICROSIL Microporous Insulation is an incredible insulation material exhibiting thermal conductivity an order of magnitude lower than ceramic fiber materials in numerous unique and demanding thermal management applications with temperatures as high as 950°C (1742°F). Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina Adhesive Type AL-CEM/DB1 is a ceramic cement paste offering good bond strength and thermal shock resistant properties for assembling, sealing and cementing porcelain, glass, metal and other materials. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina-Silica Blanket Type ASB are mechanically-needled refractory ceramic-fiber (RCF) blankets that exhibits good handleability and strength, have low shot content and are easily cut. Technical Data Sheet ASB-2300 Safety Data Sheet ASB-2600 Safety Data Sheet -
SALI-2 is a premium-grade high-performance 1800°C insulation fabricated from high-alpha polycrystalline alumina fibers tightly bound in a mullite binder matrix. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina Bubbles Type IB-100 are hollow, thin-wall, high-purity alumina ceramic spheres. Technical Data Sheet Safety Data Sheet -
ZAL-45AA is a high-density high-strength, alumina-bonded product with superior resistance to chemical attack along with good dimensional stability in industrial applications with continuous temperatures of 1550°C (2822°F) with intermittent use to 1600°C (2912°F). Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina-Silica Type UNIFORM A is a unique family of ceramic-fiber-based insulation with exceptional machinability and very good strength in applications with temperatures to 1260°C (2300°F). Technical Data Sheet UNIFORM A1 Safety Data Sheet UNIFORM A2 Safety Data Sheet -
AL-28/1800 is a cost effective, utility-grade hot face insulation for use in kilns, furnaces and other thermal process systems operating to temperatures of 1800°C (3272°F). Technical Data Sheet Safety Data Sheet -
PATI is a uniquely reinforced premium grade insulation for use in advanced thermal systems operating to a maximum use temperature of 1720°C (3128°F). Technical Data Sheet Safety Data Sheet -
ZAL-15AA is an alumina-bonded, low-density structure with very good hot strength and dimensional stability in corrosive industrial applications involving continuous operating temperatures to 1500°C (2732°F) - withstanding intermittent use to 1600°C (2912°F). Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina-Silica Cement Type AS-CEM is a single-part, water-based coating cement with useful properties to 1260°C (2300°F). Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina Type SALI Moldable is a ready-to-use, moist, moldable combination of polycrystalline Alumina fibers and high-purity ceramic binders for use up to 1700°C (3092°F). Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Fiber-Insulated Heaters, Type FIH, are rigid combinations of high quality resistance wire and vacuum formed ceramic fiber thermal insulation. Fiber-Insulated Heater Type FIH deliver fast, efficient and reliable uniform heat to temperatures of 1100°C (2012°F) with power densities up to 1500 watts/ft². Technical Data Sheet -
ZIRCAR Ceramics’ Silica Rigidizer Type SI-RIG is a single-part water-based suspension of colloidal silica. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina Castable Type ZIRALCAST-94 is a high-purity, lightweight alumina refractory castable composed primarily of hollow, fused alumina bubbles incorporated into a high-quality hydraulically setting cement. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina-silica Insulation Type HASH-60 is a high-strength, uniform, rigid, refractory board composed of shot-free refractory ceramic fibers (RCF) and high-purity alumina binders. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina-Silica Insulation Type ECO-1200 is a useful utility grade of refractory ceramic fiber (RCF) insulation board suitable for use to 1260°C (2300°F). Technical Data Sheet ECO-1200A Safety Data Sheet ECO-1200B Safety Data Sheet -
ZIRCAR Ceramics’ Alumina-Silica Bulk Fibers are high-purity alumina-silica fibers (RCF) exhibiting high dimensional stability in industrial applications with temperatures as high as 1260°C (2300°F). Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina-Silica Type UNIFORM C is a 1420°C (2600°F) rated, unique family of ceramic-fiber-based insulations with exceptional machinability and very good strength. Technical Data Sheet UNIFORM C1 Safety Data Sheet UNIFORM C2 Safety Data Sheet -
ZIRCAR Ceramics’ Alumina-Silica Insulation Type AXL is a strong, 1260°C (2300°F) rated, rigid refractory structure of high-purity refractory ceramic fibers (RCF) and high-purity inorganic Colloidal (Amorphous) Silica binders. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina Furnace Pins are made of slip-cast, fine-grain, high-purity Alumina and are a convenient method for hanging ceramic fiber blanket or boards in furnaces, kilns and other systems with operating temperatures as high as 1700°C (3092°F). Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Refractory Hardboard Type BM products are a range of structural insulation boards that combine calcium silicate cements with inorganic binders and reinforcing fillers. Technical Data Sheet Safety Data Sheet -
ECO-20AA is an ultra-high-alumina utility-grade board that is useful in furnaces with reducing atmospheres with temperatures as high as 1600°C (2912°F) and is also useful in non-ferrous metal applications where SiO2 cannot be tolerated. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Hanger and Support Rods are high-density, creep-resistant ceramic components used to structurally support rigid ceramic-fiber-based thermal insulation in low-mass furnaces operating to temperatures of 1800°C (3292°F). Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Refractory Adhesive Type SS is a "hard" adhesive with useful properties up to 1000°C (1832°F). Technical Data Sheet Safety Data Sheet -
AL-30 is a strong 1600°C rated material with uniform open porosity and high machinability. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Zirconia Coating Type ZC-2 is water-based, concentrated suspension of Zirconium Oxide. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Soluble Fiber Moldable Type SF Moldable is a combination of low bio persistence high temperature fibers blended into a sticky, water-based refractory binder. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina-Silica Type ASH is a 1260°C (2300°F) rated uniformly-bound combination of specially processed shot-free refractory ceramic fiber (RCF) and inorganic alumina binder. Technical Data Sheet Safety Data Sheet -
AL-45/1700 is a high-density alumina fiber board used to distribute the weight of loads being fired in rapid-cycle laboratory and production furnaces at temperatures to 1700°C (3092°F). Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ ZIRPORCOAT-2 is a combination of fine polycrystalline ceramic fillers in a water-based colloidal carrier that enhances handleability of Microporous insulation it is applied to. Technical Data Sheet Safety Data Sheet -
ZIRCAR Ceramics’ Alumina-Silica Type Z-500 is a uniquely high-strength rigid combination of specially processed refractory ceramic fiber (RCF), low-surface-area ceramic fillers and inorganic binders with useful properties to 1000°C (1832°F). Technical Data Sheet Safety Data Sheet
